IrriMOP H6

Developed to control and manage any hose reel irrigation machine

IrriMOP H6, an electronic device dedicated to the complete management of an irrigation machine.

Every function has been conceived and designed to make the use of these irrigation machines increasingly easy and immediate, whether they are turbine, hydraulic or even more complex with motor pump unit integrated.

Graphics, guided menus, and the simplicity of work pages enable quick and easy-to-understand operator interaction.
Maximum enjoyment of all integrated functions for intelligent, precision irrigation.
All this makes our IrriMOP H6 device the most comprehensive product on the irrigation market for controlling irrigation machines.

Functions

High/low pressure, bypass, and auxiliary sprinkler valve management
Protection and motor control for hydraulic system
Return speed and/or rainfall adjustment
Pre/post irrigation time management
operating hours counter
Automatic pause for lack of water and/or wind intensity
Return speed change for up to 4 sectors
Electronic sprinkler interface

Managed applications

Turbine

Use the force the water to collect the trolley

Hydraulic

Uses a pressurized oil circuit to move the machine and retract the trolley

Integrated

Special application with built-in motor pump unit for maximum flexibility of use

Advanced functions

Advanced functions

ELECTRONIC SPRINKLER

FACILITY MANAGEMENT

Irrigates the desired area in the best way without unnecessary waste.

The interface between the control unit and the electronic sprinkler allows even and confined water distribution to the targeted area.
Cross-checking between the GPS position of the machine and the sprinkler ensures absolute accuracy on the return speed and timing of irrigation.

1 PUMPING UNIT UP TO 5 REELS

Forget about starting and turning off your pumping unit, the irrigation machines will do that. The first machine to start a new irrigation will start the pumping unit, the last machine to finish irrigation will turn it off. At completion, you can manage submersible pumps by soft start, further improving the efficiency of the ‘irrigation system.

Functions

High/low pressure, bypass, and auxiliary sprinkler valve management
Protection and motor control for hydraulic system
Return speed and/or rainfall adjustment
Pre/post irrigation time management
operating hours counter
Automatic pause for lack of water and/or wind intensity
Return speed change for up to 4 sectors
Electronic sprinkler interface

SIZE
WEIGHT
CASE
PROTECTION
POWER
ABSORPTION

192.5 x 198 x 62 mm
600g
ABS + Polycarbonate
IP65
8 – 30 Vdc
100 – 220 mA

Coverage
165 countries

Network
LTE Cat 1

Geolocation
GNSS

Frequencies
LTE-FDD:
B1,B2,B3,B4,B5,B7,B8,B12,B13,
B18,B19,B20,B25,B26,B28,B66.

LTE-TDD:
B34,B38,B39,B40,B41.

COVERAGE
NETWORK
GEOLOCATION
FREQUENCIES

165 countries
LTE Cat 1
GNSS
LTE-FDD:
B1,B2,B3,B4,B5,B7,B8,B12,B13,
B18,B19,B20,B25,B26,B28,B66.
LTE-TDD:
B34,B38,B39,B40,B41.

Dimensions
192.5 x 198 x 62 mm

Weight
600g

Case
ABS + Polycarbonate

Protection
IP65

Power supply
8 – 30 Vdc

Power consumption
100 – 220 mA

Models

IrriMOP STD

IrriMOP H6
STD

IrriMOP-ID4.png

IrriMOP H6
ID4

IrriMOP ID4 Platinum

IrriMOP H6
ID4 Platinum

Speed sensor

Vacuum sensor

Pulse Anemometer

Pressure transducer

Linear actuator

Shielded inductive proximity sensor for reading speed signal on sprinkler machines

Absolute sensor for detecting the water vacuum at the inlet of the pumping unit

Tool for determining wind speed

Sensor for sensing water pressure at the discharge of a pumping unit or as a pressure switch for an irrigation machine

The linear actuator can be used with bracketing on the diesel feed pump to control engine speed

4G high gain magnetic antenna

4G 2M magnetic antenna

4G + GPS 2M magnetic antenna

3M GPS / GLONASS magnetic antenna

High-gain antenna with magnetic base for receiving 5G / 4G / 3G / 2G signals

Antenna with magnetic base for receiving 4G/ 3G / 2G signals

Antenna with magnetic base for receiving 4G and GPS signals

Antenna with magnetic base for receiving GPS and GLONASS signals

CAN BUS

PRIMING

PUMPING GROUPS

IRRIGATION MACHINES

ADAPTERS

ACCESSORIES

Wiring CAN BUS Plug JPT42 0074_00
CAN BUS extension cable Male-Female L 900mm / 1800mm / 2700mm
Splitter cable – Deutsch
CAN BUS extension cable Female-Female 7000mm
Splitter cable – Molex
Priming wiring for compressor
Priming wiring for electric pump 30A / 70A
Frayed motor harness 31V5
Universal structured motor harness 32V6
TIERIII IdroMOP motor harness 0010_V0
John Deere motor harness
Stage V 2M motor harness – Sicma 24 pos
FPT Stage V motor harness – FCI 14 pos
IrriMOP 0049_00 hydraulic machine wiring
IrriMOP 0053_2A turbine machine wiring
Adapter Elcos A/B JPT42 COD. 0056_00
Adapter Elcos A/B JPT42 CEM-190/196
Adapter Mate-N-Lock JPT42 COD. 0047_00
Adapter Irtec Souriau 18-JPT42
Adapter Matermacc plant
Adapter CANBUS 40CM CONN. DT4/CPC4 COD.0069_1A
Cable meter-pack 150 MPF 5M/ 10M
Speed Sensor Extension M12-SS3 5M
Speed sensor cable QE12-N4G2-U 2M/5M