Accessories for control units
SPEED SENSOR
Shielded inductive proximity sensor for reading speed signal on sprinkler machines
Voltage: 10-36V
Range: 4mm

VACUUM SENSOR
Absolute sensor for detecting the water vacuum at the inlet of the pumping unit
Amperage: 4-20mA
Voltage: 10-30V
Range: 0-4 bar

PULSE ANEMOMETER
Tool for determining wind speed
Material: Anodized aluminum and stainless steel
Input: 0.75 m/s
Output: 275 herz
Accuracy: ±0.01m/s (0.3 to 16m/s);
±0.05m/s (>16m/s)
Range: 0… >75 m/s

PRESSURE TRANSDUCER
Sensor for detecting water pressure at the discharge of a pumping unit or as a pressure switch for an irrigation machine
Amperage: 4-20mA
Voltage: 10-30V
Range: 0-25 bar

LINEAR ACTUATOR
The linear actuator can be used with a bracket on the diesel fuel for engine speed control
Working range: 100 mm
Speed: 10 mm / sec
Installation: On bracket
Voltages: Available for 12Vdc / 24Vdc power supplies

Antennas
4G HIGH GAIN MAGNETIC ANTENNA
High-gain antenna with magnetic base for receiving 5G / 4G / 3G / 2G signals

4G 2M MAGNETIC ANTENNA
Antenna with magnetic base for receiving 4G/ 3G / 2G signals

4G + GPS 2M MAGNETIC ANTENNA
Antenna with magnetic base for receiving 4G and GPS signals

GPS / GLONASS 3M MAGNETIC ANTENNA
Antenna with magnetic base for receiving GPS and GLONASS signals

Accessories for electrical panels
- Clicca sopra i titoli in grassetto
The framework can be attached to any metal structure even from below

Plinth
Plinth with side ventilation openings
for frame and floor fixing

Coverage
Lower plinth cover
for frame fixing

Square cap
Square socket cap with threaded insert
for frame mounting
The framework can also be fixed in the middle of farmland by special screws

Plinth
Plinth with side ventilation openings
for frame and floor fixing

Plate
Lower plinth plate with provision for screw holes
for ground fixing

Screws
Screws
for ground fixing
Quick wall installation via rear threaded holes or support brackets with anchor plugs

Brackets
Flat and bent brackets
for wall mounting

Anchors
Anchor screws
for wall mounting
Accessories for servomotors

SHAFT - FRAME ADAPTER
