IdroMOP H6
Developed to control and manage any pumping group
The IdroMOP H6 device is designed for maximum flexibility and versatile management of pumping units.
IdroMOP H6 offers the best automation in the irrigation industry with optimization of irrigation cycles.
Intuitive graphics and accurate and timely information enable work in total peace of mind and reliability.
In automatic mode, the device operates autonomously at each irrigation stage: pump priming, start
and engine heating, system filling, engine speed and/or pressure adjustment, completion
of the work cycle, engine slowdown and cooling, and engine shutdown.
Through sensors installed on the pump assembly, the IdroMOP H6 device constantly monitors the health of the motor,
the pump, and the system. The operator can monitor the irrigation process locally from the panel or remotely through
the My ID4 application. Flow control and consumption display minimize water and fuel waste.
IdroMOP H6
Developed to control and manage any pumping group
The IdroMOP H6 device is designed for maximum flexibility and versatile management of pumping units. IdroMOP H6 offers the best automation in the irrigation industry with optimization of irrigation cycles.
Intuitive graphics and accurate and timely information enable work with total peace of mind and reliability. In automatic mode, the device operates autonomously at each irrigation stage: pump priming, motor startup and warm-up, system filling, motor speed and/or pressure adjustment, completion of the working cycle, motor slowdown and cooling, and motor shutdown.
Through sensors installed on the pump unit, the IdroMOP H6 device constantly monitors the health of the motor, pump, and system.
The operator can monitor the irrigation process locally from the panel or remotely through the My ID4 application. Flow control and consumption display minimize water and fuel waste.
Managed applications
Motor pump
From the simple mechanical pump engine to the more modern STAGE V emission engine, with or without urea. One device for all engines.
Generator + Electric pump
Generator control and one or two electric pumps. Integrated inverter interface via RS-485 communication line associated with safety I/O lines. Soft-start control reduces starting torque by decreasing mechanical stress to the system.
Electric pump
For GREEN systems, our solution for exclusive use of electric pumps. For increasingly sustainable irrigation.
Stage V
The use of Stage V-emitted engines results in a significant reduction in emissions.
IdroMOP H6 devices adopt the best strategies in compliance with Stage V regulations. Supervision of particulate filter clogging, verification of additive quality and level, and engine oil contamination control are just some of the functions built into our IdroMOP H6 devices.
Inverter
IdroMOP H6 enables the complete management of inverters to control electric motors, offering significant advantages in efficiency, energy savings, and precision in water resource management. These devices allow the speed of the motors to be adjusted with extreme precision, adapting the water flow to the specific needs of the crops.
To complement this, it is possible to manage submersible pumps by soft start, further improving the efficiency of the ‘irrigation system.
Pumping groups
Through the ID4 platform, up to 8 motor pumps, or electric pumps, can be connected and made to work as one.
Start, stop and working point of all pumps will always be synchronized, and in case of an abnormality the whole pumping unit will be stopped in a controlled way.
Models
IdroMOP H6 STD
Full engine management and protection
Full irrigation process management and system protection
Manual adjustment of engine speed
Automatic pressure adjustment
IdroMOP H6 ID4 Platinum
Full engine management and protection
Full irrigation process management and system protection
Manual adjustment of engine speed
Automatic pressure adjustment
Electronic engine management via CANBUS
Inverter management via RS-485
4G modem + built-in SIM
GPS geolocation
Full remote control with 3, 6 or 12-month subscriptions
IdroMOP H6 ID4
Complete motor management and protection
Complete irrigation process management and system protection
Manual motor speed adjustment
Automatic pressure adjustment
Electronic motor management via CANBUS
4G modem + integrated SIM
Simplified remote control with annual subscription
TECHNICAL SPECIFICATIONS
General
Dimensions
192.5 x 198 x 62 mm
Peso
600g
Case
ABS + Polycarbonate
Protezione
IP65
Power supply
8 – 30 Vdc
Absorption
100 – 220 mA
Radio
Coverage
165 countries
Network
LTE Cat 1
Geolocalizzazione
GNSS
Frequenze
LTE-FDD:
B1,B2,B3,B4,B5,B7,B8,B12,B13,
B18,B19,B20,B25,B26,B28,B66.
LTE-TDD:
B34,B38,B39,B40,B41.
Compatible Accessories
- Antennas LTE / LTE + GPS / GPS
- Pressure translator
- Vacuum sensor
- Well water level sensor
- Flow switch
- Discharge servomotor
- Servomotor priming pump