Our solution
INOX
without compromise
This solution also offers greater protection from the elements, as there are no critical cuts on the sides. Panel electrically welded to the highest standards, without external screws.
Airflow
With the upper roof, ventilation is specially designed to ensure a constant flow of fresh air, avoiding the internal recirculation of warm air.
Safe
Main door with single key and illuminated emergency button on the main door. The inner door does not allow direct contact with the mains voltage while working. Everything you need is on the door. The inner door does not allow direct contact with the mains voltage while working.
Everything you need is on the door.
Many possible installations
Chassis
The framework can be attached to any metal structure even from below
Field
The framework can also be fixed in the middle of farmland by special screws
Wall
Quick wall installation via rear threaded holes or support brackets with anchor plugs
Control
Over the years, IdroMOP has gained extensive experience in numerous hybrid and all-electric applications. Now it is transferring all it has learnt on this project!
Connections
Pressure sensor (0 to 25 bar)
Vacuum sensor (-1 to 4 bar)
Level sensor (0 to 10 m)
Flow switch (NO)
Flow meter (1/10lt or 1/100lt)
CANBus devices
Standard limit switch Valve
External control (start/stop)
Functions
Motor parameterization
Automatic pressure regulation
Manual frequency control
Setting watering times and cycles
Full diagnosis
Internal temperature regulation
Internal humidity control
Full remote control via “My ID4
Power
Among many frequency converters, we chose SIEMENS as an ideal partner for this project. Great development potential, maximum reliability over time, and globally recognized service support.
The new G120X is specially designed for the control of pumps, fans and compressors.
Technical Data
Line voltage
3AC 380V (-20%)…480V (+10%)
Efficiency (η)
98%
Output frequency
from 0 Hz to 150 Hz
Overload
Variable torque 110% x IL for 60s
Constant torque 150% x IH for 60s
Working temperature
-20°C to 45°C without derating
45°C to 60°C with derating
Functions
Automatic motor identification
Phase loss detection
Overvoltage controller
Undervoltage controller
Drive overtemperature protection
Motor overtemperature protection
Protection from motor short circuit and ground fault
Lockout and stall monitoring and protection
Motor overload monitoring and protection
Multiple pump control
Anti-freeze protection
Anti-condensation protection
Anticavitation
Pump cleaning
Models
eN Series
Dimensions
400x650x300 mm
Power
4, 5.5, 7.5, 11, 15 kW
Features
Single door
Double key
Fan and filter
eM Series
Dimensions
600x850x400 mm
Power
22, 30, 37, 45, 55 kW
Features
Double door
Single handle
Fan and filter
Heater
eH Series
Dimensions
800x1250x400 mm
Power
75, 90, 110, 132 kW
Features
Double door
Single handle
Double fan and filter
Heater
